OEM Design Group Loto Box Combination Wall Mounted Group Lockout Box Tagout

Lockey OEM 2019 New Portable Combination Wall-Mounted Group Lockout Box Tagout

Part No.: LK31

Wall-Mounted Group Lockout Box

• The Wall-Mounted Group Lockout Box is injection molded using Isoplast polymers for extra durability, has excellent chemical and heat resistance and is impossible to corrode.
• The lock rails accommodate up to 8 padlocks and the slot in front allows keys to be inserted when box is locked.
• Use one lock on each energy control point and place the keys in the lockout box; each worker then places his own lock on the box to prevent access.
• Each employee retains exclusive control, as required by OSHA, by placing his own lock on the lockout box containing the keys to the job locks
• As long as any one worker's lock remains on the lockout box, the keys to the job locks contained inside cannot be accessed.

Lockout tagout concept

According to the definition in GB/ t333579-2017, locking/listing is to place lockout tagout on the energy isolator in accordance with the established procedure to indicate that the energy isolator shall not be operated until the lock/tag is removed according to the established procedure. "Lockout tagout" can be either a separate locking device or a hangtag device, or both. The industry also calls it lockout tagout, or LOTO for short

Lockout tagout are all safety measures in temporary downtime such as maintenance, cleaning, etc., and can only be implemented by authorized personnel. The single listing device is only a warning device, which is easy to be damaged and removed in nature, and easy to be removed artificially. Moreover, it cannot prevent misoperation, and cannot make the machine itself in a safe state. Therefore, generally, the locking device and the listing device will be used together in the process of dangerous energy control.

Lockout tagout purpose is to prevent accidental pneumatic machines as well as to prevent the accidental release of dangerous energy, dangerous energy here refers to any energy may cause personal injury, including electrical, mechanical, hydraulic, pneumatic, chemical, thermal energy and potential energy, in order to avoid accidental release of dangerous energy, usually equipped with energy isolating device, the physical mechanism of energy transfer or release prevention, such as:

Manually operate circuit breakers, disconnecting switches, and manual disconnecting all live wire connections through these devices:

Globe valve

stop

Other similar devices used to block or isolate energy.

If the isolation is not in place, it may lead to serious casualties. Common isolation errors are as follows:

Not stopping the machine or equipment;

Not actually cutting off energy;

No residual energy is released;

Accidentally turning on a closed device;

Work site not cleaned before re-pneumatic.

Through the strict direct lockout tagout basic procedures, you can prevent the accidental start of the machine, the accidental release of energy, to protect the safety of personnel