Industrial Insulated Electric Power Safety Lockout Hasp Custom Colors Of Handle

Industrial Insulated Electric Power Safety Lock Steel Lockout hasp

Part No.: SH01

Steel Lockout Hasp

• Handle is made from PA, and lock shackle is made from nickel plated steel with red plastic or vinyl coated body, rust proof.
• Allow multiple padlocks to be used when isolating one energy source.
• Lock holes:10.5mm diameter
• Jaw size:1’’(25mm) & 1.5" (38mm)
• Colors of handle can be customized.

Examples of Lockout tagout verification -- mechanical energy

Close the valve;

Test and check whether there is stored pressure in pipelines, accumulators and cylinders, such as stored compressed air, gas, steam, water, liquid, etc.

Mechanical interlock protection, approved standard operating procedures or a valid work permit are required for openings with mechanical risks in the equipment area.

Chain protection is a means of energy control, it does not mean energy isolation!

Examples of Lockout tagout validation -- kinetic energy

During the breakdown of the forklift, a yellow warning board must be filled in and placed in a prominent position of the starting part to warn others not to use it. After repair, it shall be removed by the designated person on the yellow card. Apply steering wheel lock to prevent others from using forklift.

Each crane has its own isolation point

When inspecting the crown crane, perform energy control according to the crown crane isolation rules. The remote control must be controlled.

Fixed lock box of the remote control is set on the truck -- the remote control is put into the lock box during maintenance -- all maintenance personnel lock it -- the maintenance is finished, and the personal lock is removed to restore energy.

Examples - water energy, chemical energy

Close the valve, with the help of the locking device to achieve Lockout tagout;

Lockout tagout;

Confirm that isolation device, locking device and equipment lock/overhaul plate are intact and firm;

Verify that the switch cannot be changed.