38mm Nylon Insulation Shackle Lockey Safety loto lock Lockout Tagout Padlock
Part No.: P38P
38mm Short Plastic Shackle Safety Padlock
Part No. | Description | Shackle Material | Specification |
KA-P38S | Keyed Alike |
Steel |
“KA”: Each padlock is keyed the same in one group “P”: Straight edge plastic lock body “S”: Steel shackle
Other material can be customized: “SS”: Stainless steel shackle “BS”: Brass shackle |
KD-P38S | Keyed Differ | ||
MK-P38S | Keyed & Alike/Differ | ||
GMK-P38S | Grand Master Key | ||
KA-P38P | Keyed Alike |
Nylon |
|
KD-P38P | Keyed Differ | ||
MK-P38P | Keyed & Alike/Differ | ||
GMK-P38P | Grand Master Key |
Temporary power and ventilation cannot perform Lockout tagout process
Sometimes the equipment maintenance needs power or compressed air, so the Lockout tagout process cannot be implemented. This is not only a misunderstanding, but also a common problem encountered in the early implementation of Lockout tagout, mostly due to resistance feedback from maintenance personnel. During the maintenance of the equipment, there is a period of power connection, such as debugging and positioning, when temporary unlock and delisting is required. The steps for temporarily unlocking and delisting are:. Clean up maintenance tools and materials; @ fulfill the steps of unlocking and delisting; . Connect to the energy, carry out necessary debugging, positioning and other work; Perform the Lockout tagout step again. It should be clarified to the maintenance personnel that such "Lockout tagout" procedures are indispensable to the safety of the maintenance personnel and cannot be refused to perform the Lockout tagout process.