Nylon Insulation Safety Lockout Hasp With 4 Locks And Yellow Color Master

High Quality Factory direct Nylon Insulation Lockout Hasp with 4 Locks Yellow Master

Part No.: NH04

Nylon Lockout Hasp

• The lock body is made of ABS, and the shackle is made of PA.
• Non-conductive body, applied to lock out electric power isolations with high requirements on corrosive or explosion-proof places.
• With 3mm or 6mm shackle diameter available.

Hazard energy control procedure

General requirements

The total critical element of the overall hazardous energy program is the formulation of procedures. Each unique machine or machine group shall develop and document detailed hazardous energy control procedures during maintenance or maintenance. These procedures shall be posted and published or otherwise accessible to authorized personnel for inspection and use.

When a workshop or factory has more than one machine of the same kind or more than one system or production line, all machines may also adopt one program.

If the machine has only one source of energy and can be easily identified and isolated, no written procedures are required.

Elements of control procedures

Hazardous energy control procedures should clearly and specifically outline the requirements for effective isolation of machines. The procedure shall include all of the following;

Machine identification;

A list of all required energy isolation devices and locations;

A specific procedural step for shutting off, isolating, blocking, fixing, or releasing stored or surplus energy;

Specific steps for placing and removing the lockout tagout device;

Verify that the specific isolation and disability requirements are met.