|Place of Origin:||Wenzhou, China|
|Certification:||CE, ISO 9001, OHSAS 18001|
|Minimum Order Quantity:||100|
|Delivery Time:||1-5 working days|
|Payment Terms:||L/C, T/T, Western Union|
|Product Name:||Economic Cable Lockout||Material:||Nylon|
|Color:||Red, Green, Yellow, Other Colors Available||Size:||Cable Diameter 3.8mm, Length 2 M|
|Suitable For:||Accepts Up To 6 Padlocks For Multiple Lockout Application||Custom:||Labels Can Be Customized|
adjustable cable lock,
car seal wire locks
High Quality Adjustable Economic Cable Lockout with cable dia. 3.8mm length 2m
Part No.: CB05
Economic Cable Lockout
Introduction to industrial safety production:
First of all, safety awareness is the concept that production must be safe in people's mind, that is, people are alert and alert to various external environmental conditions that may cause harm to themselves or others in production activities. Production safety refers to personal safety, equipment safety, product safety and traffic safety in industrial production. It follows the policy of "safety first, prevention first", with the standard of not hurting others, not hurting themselves and not being hurt by others.
|CB05||Cable diameter 3.8mm, length 2 m|
For new machines, changes to existing machines, correction of identified hazardous energy control defects, and possible improvement of hazardous energy control, the user shall make plans to determine whether a procedure needs to be developed or revised.
The user shall establish a responsibility mechanism to ensure that the procedures accurately reflect the current requirements and effectively control the dangerous energy of the machine.
The program shall be readily available to authorized personnel in the form of printed or electronic documents, or in the form of machine nameplates.
The machine shut down
The machine should be shut down or disabled through specially established hazardous energy control procedures.
Isolation of the machine, all energy isolation devices used to control the energy required for the machine to complete a predetermined task, shall ensure that the machine can be isolated from energy.
For complex machines, where it is necessary to isolate the power or motion of a particular component, while maintaining the power supply of the control system, auxiliary equipment, and other devices and components, a locked-area (local) energy isolation device should be used.
The use of locking or hanging devices
The locking or hanging device shall be attached to each energy isolating device by an authorized person.
When using a locking device, ensure that the energy isolating device is kept in a "safe" or "off" position.
When using a hangtag device, make it clear that it is forbidden to operate or move an energy isolating device in a "safe" or closed position.
When used in conjunction with a lockable energy isolator, the hangtag shall be fixed in the lock position of the energy isolator.
If the hangtag cannot be attached directly to the energy isolator, it should be placed as close to the energy isolator as possible and in a safe place so that anyone attempting to operate the machine can immediately see it. In addition, the operator's control position should also be set up to remind the staff that the machine is in a disabled state.
Contact Person: claire