Upgrade 38mm Steel Shackle Long Shaft Padlock OEM Nylon Body Loto Locks

Lockey New Design Upgrade 38mm Steel Shackle Safety Padllock OEM Nylon Body Loto Locks Lockout Tagout

Part No.: CP38S

38mm Steel Short Shackle Safety Padlock

a) Reinforced nylon body, withstand temperature from -20℃ to +80℃. The steel shackle is chrome plated; the non-conductive shackle is made from nylon, withstand temperature from -20℃ to +120℃, ensuring the strength and deformation fracture not easily.

b) Key Retaining Feature: When the shackle is open, the key can’t be removed.

c) Copper lock core setting, elastic ball mode, wear-resistant, rustproof and non-deformation. Exquisite internal structure, open the internal spring sheet smoothly. The technology is more perfect, the safety protection performance is more advanced, the mutual opening rate is lower.

d) The key new upgrade - with atomic lock key, opening the lock more smoothly.

e) Laser printing and logo engraving available if required.

f) All different colors available.

Make sure your locking device is resistant to its environment, such as humidity, corrosivity, etc., or it will lose its effectiveness.

The padlock needs to be used with the tagout.

Handling charge level

1. Dress code for employees' labor insurance.

2. The stone furnace will be shut down and tag according to the tagout system.

3. Only one access door of the calcium carbide furnace can be opened at a time for treating the material surface, and the next access door can be opened only after the ash accumulated from this cleaning is removed.

4. When dust is accumulated on the furnace cover plate, keep away from people under the furnace

5. The water accumulated on the material surface and furnace cover plate shall be dealt with timely. Waterproof and moisture-proof safety measures shall be taken with dry wood boards or insulating belts.

6. The tools for processing the material surface should be placed under the north wall of the material surface neatly after use, which cannot affect the on-site maintenance work and walking passage.

Live operation of low voltage equipment and lines

1. Implement the maintenance tagout system, and implement the second kind of work ticket for the equipment stipulated by the factory

2. Employees' labor insurance articles of clothing conform to the norms

3. Good insulation performance of tools

4. Make insulation measures (insulation mat, insulation shoes, insulation gloves, insulation board, etc.)

5. At least 2 persons and more than 2 persons shall be assigned to monitor the live operation

6. Test the equipment and circuit before operation, and confirm the live parts, electrical equipment and circuit

7. No load operation

8. Take isolation measures and safety measures to keep the live parts apart

9. Work in height shall not be carried out on line

10. The insulation wrapping of the joint should be firm and reliable, and the insulation strength should be maintained without bearing tension;